4-way splitter/switcher with ALL Outputs ISOLATED.
Active, buffered, suitable both for bass & guitar or any other instrument with similar pickups.
It features high input impedance and very low output impedance in order to preserve your tone and to not degrade your signal.

Every output is equal to the input (zero volume drop) and is isolated each with a dedicated audio transformer. Each output has a dedicated foot-switch (+ LED) so that you can turn them ON/OFF on the fly.

The splitter can be powered with a variety of voltages ranging from 9V up to 24V max. Larger voltages offer you more headroom so that you can
also use it with higher line level signals.

All output jacks, including the DC-jack are placed at the top-side of the enclosure and the input jack on the right side.

▹ Input impedance: ~3.3MΩ
▹ Output impedance: ~330Ω
▹ Voltage required: 9-24V DC
▹ Polarity: Center negative
▹ Current consumption: 10mA @ 9V
▹ Enclosure dimensions: 120 x 95 x 35mm (4.72 x 3.74 x 1.37in)
▹ Weight: 440gr

#dpFX #dpFXpedals #splitterpedal #boutiquepedals #handmadepedals
#handmadeeffects #basssplitter #guitarsplitter #handpaintedpedals #isolatedsplitter #splitterswitcher #switcherpedal #4waysplitter
#pedalseffects #pedalsandeffects #guitarpedals #basspedals

4-way splitter/switcher with ALL Outputs ISOLATED. Active, buffered, suitable both for bass & guitar or any other instrument with similar pickups. (detailed specs in the first comment)
#dpFX #dpFXpedals #splitterpedal #boutiquepedals #handmadepedals #handmadeeffects #basssplitter #guitarsplitter #handpaintedpedals #isolatedsplitter #splitterswitcher #switcherpedal #4waysplitter #pedalseffects #pedalsandeffects #guitarpedals #basspedals

4-way splitter with all four outputs isolated. This active, buffered, 4-way Splitter is suitable both for bass & guitar or any other instrument with similar pickups. More info/specs in first comment.

#dpFXpedals #dpFX #splitterpedal #4waysplitter #guitarsplitter
#basssplitter #boutiquepedals #handmadepedals #handpaintedpedals
#greekpedals #effectspedals #splitter #splittersthatdontsuck
#bufferedsplitter #bufferpedal #custompedals #splitterswitcher #switcherpedal #footswitchsplitter #isolatedsplitter #isolatedoutputs #pedalbuilder #pedalsandeffects

Custom 2 input Mixer with Output selection and isolation. It is equipped with two independent outputs (A,B). Additionally, the B-Output is isolated through an audio transformer in order to avoid any ground loop noise when connecting the outputs into different amps or other devices.

A rotary switch allows you to select which output is active each time and also offers a “mute” position where both outputs are silenced.

The mixer can handle instrument level signals as well as line level signals (unbalanced). If you ever need more headroom you can increase the power supply voltage up to 24V.

*** Specifications:
- Input Impedance: 10MΩ
- Output Impedance: 100Ω
- Inputs 1-2 and output-A have common ground
- B-output is isolated through an audio transformer.
- 4 position Rotary switch: (Mute), (A), (B), (A & B)
- Voltage Required: DC 9-24V
- Polarity: center negative
- Max Current draw: 14mA (@ 9V)
- Headroom vs power supply: ~7Vpp@9V | ~10Vpp@12V | ~22Vpp@24V

#dpFX #dpFXpedals #mixerpedal #isolatedsplitter #outputselector #mixersplitter #isolatedoutput #boutiquepedals #pedalmixer #mixerpedal #handmadeeffects #handmadepedals #handpaintedpedals #2inputmixer #instrumentmixer #pedalseffects #effectspedals #pedalsandeffects #pedalbuilder

4-way splitter with all four outputs isolated.
This is an active, buffered, 4-way Splitter suitable both for bass & guitar or any other instrument with similar pickups. It features high input impedance and very low output impedance in order to preserve your tone and to not degrade your signal.

Every output is equal to the input (zero volume drop) and is isolated each with a dedicated audio transformer. Each output has a dedicated footswitch (and a LED) so that you can turn them ON/OFF on the fly.

The splitter can be powered with a variery of voltages ranging from 9V up to 18V max. Larger voltages offer you more headroom (DO NOT EXCEED 18V) so that you can also use it for line level signals.

All output jacks, including the DC-jack are placed at the top-side of the enclosure and the input jack on the right side.

▹ Input impedance: 10MΩ
▹ Output impedance: 100Ω
▹ Voltage required: 9-18V DC [Do not exceed recommended voltage! It may damage the circuit.]
▹ Polarity: Center negative
▹ Current consumption: 10mA @ 9V || 15mA @ 18V
▹ Enclosure dimensions: 120 x 95 x 35mm (4.72 x 3.74 x 1.37in)
▹ Weight: 435gr

#dpFXpedals #dpFX #splitterpedal #4waysplitter #guitarsplitter
#basssplitter #boutiquepedals #handmadepedals #handpaintedpedals
#greekpedals #effectspedals #splitter #splittersthatdontsuck
#bufferedsplitter #bufferpedal #custompedals #splitterswitcher #switcherpedal #footswitchsplitter #isolatedsplitter #isolatedoutputs #pedalbuilder

Triple Splitter (1 normal + 2 Isolated) + 1 balanced XLR output.
Suitable for both bass and guitar or any other instrument with similar pickups.

This buffered splitter has three TS (6.35mm) outputs with 2 of them being isolated using audio transformers, also equipped with Phase-Reverse switches (180˚), both compatible with either balanced or unbalanced equipment. Output-1 has a common ground with the Input.

The 4th output is offered in balanced mode via the XLR connector which is equipped with a ground-lift switch.

- Voltage Required: DC 9-18 Volt (using 12-18V gives you more headroom)
- Max Current draw: 12mA @ 9V
- Input impedance: 3.3MΩ
- Output impedance: < 1kΩ
- Equipped with indicative LEDs to show you when the pedal is powered.

#splitter #isolatedsplitter #displitter #dibox #groundloopnoiseisolator #biamp #dpFX #dpFXpedals #handpaintedpedals #boutiquepedals #handmadepedals #signalsplitter #triplesplitter #xlrout #xlr #xlrsplitter #handmade #handmadepedals